Series | F12 |
Package diameter | 12mm |
Operating Direction | Horizontal Vertical |
Bushing material | |
Number of Gangs | 1 |
Power-linear | 0.1W |
Power-audio | 0.05W |
Life cycle | 10K |
Switch Option | Y |
Detent Option | N/A |
Mounting | |
Element | |
Temperature ppm/℃ | |
Tolerance | |
Pulse | |
Shaft material | |
Life cycle | |
Operating type | |
Power rating | |
Travel(mm) | |
Lever length | |
Turns | |
Specification | Document download |
Introdution
1.Carbon element.
2.Molded case.
3.Wide assortment of resistance tapers.
Electrical characteristics | |
Total Resistance | 100Ω ~1MΩ |
Total Resistance Tolerance | 20% |
Resistance Taper | A, B, C, D, etc |
Max. Operating Voltage | Taper B: AC150V; Other Tapers: AC 100V |
Rotational Power | Taper B: 0.1W; Other Tapers: 0.05W |
Sliding Noise | Less than 100mV |
Residual Resistance | Term.1~2: Less than 20Ω;Term.2~3:Less than 20Ω |
Mechanical characteristics | |
Total Rotational Angle | 230 ± 10° |
Rotational Torque | 10~100gf.cm |
Rotational Stopper Strength | 2.0Kgf.cm Min. |
Push-Pull Strength | Push: 1.0Kgf.cm Min |
Durability | |
Rotational Life | 10,000 Cycles |
Switch characteristics | |
Switch Circuit | S.P.S.T |
Switch Contact Resistance | Less than 50mΩ |
Switch Withstand Voltage | 1 Minute at AC 500V |
Rated Power | 1.0A at AC/DC 12V |
Switch Torque | 100~350gf.cm |
Switch Rotational Angle | 35±10° |