| Series | F09K |
| Package diameter | 9mm |
| Operating Direction | Horizontal Vertical |
| Bushing material | |
| Number of Gangs | 1-2 |
| Power-linear | 0.05W |
| Power-audio | 0.025W |
| Life cycle | 10K |
| Switch Option | N/A |
| Detent Option | Y |
| Mounting | |
| Element | |
| Temperature ppm/℃ | |
| Tolerance | |
| Pulse | |
| Shaft material | |
| Life cycle | |
| Operating type | |
| Power rating | |
| Travel(mm) | |
| Lever length | |
| Turns | |
| Specification | Document download |
Introdution
F09K Series
Metal shaft Potentiometer
Feature
1. Flux build prevention is taken inserting. The resistor is molded around with resin.
2. Carbon film element.
3. Insulated shaft.
4. Long Life Type Available
F09K Insulated Shaft Potentiometer
| Electrical characteristics | |
| Total Resistance | 1KΩ~1MΩ |
| Total Resistance Tolerance | 500Ω＜R＜1MΩ: ± 20% : R＜500Ω or R＞1MΩ: ±30% |
| Resistance Taper | A, B, C |
| Max. Operating Voltage | AC 50V / DC 20V |
| Rated Power | Single Unit: 0.05W Dual Unit: 0.03W |
| Rotational Noise | Less than 100mV |
| Insulation Resistance | More than100MΩ at DC 250V |
| Withstand voltage | 1minute at AC 250V |
| Residual Resistance | Term.1~2: Less than 20Ω: Term.2~3: Less than 20Ω |
| Gang Error (Dual Unit) | -40dB~0dB ± 3dB |
| Mechanical characteristics | |
| Total Rotational Angle | 280°±10° |
| Rotational Torque | 10 ~90gf.cm |
| Stopper Strength | 3.0Kgf.cm Min. |
| Push-Pull Strength | 5.0Kgf Min |
| Click Torque | 30~120gf.cm |
| Durability | |
| Rotational Life | Standard life :15，000 Cycles Min .: Long life: 10,000 Cycles Min. |
